What should be paid attention to when installing and using the glass tube level gauge

[China Glass Net] Glass tube liquid level gauge is a direct reading liquid level measuring instrument. It is suitable for on-site inspection of liquid position in general liquid storage equipment in industrial production process. Its structure is simple and accurate measurement is a traditional site. Level measurement tool. The glass tube level gauge measures the level of the liquid in the container using the principle of the connected device. It consists of a glass tube, a needle valve and a lock nut.

Glass tube level gauge installation and use items:

1. The glass tube liquid level gauge should not be impacted or beaten during transportation, handling and installation to prevent the glass tube and glass piece from being broken.

2. After installation, when the temperature of the medium is very high, do not open the valve immediately. It should be preheated for 20-30 minutes. After the glass tube has a certain temperature, slowly open the valve. Valve opening procedure: first slowly open the upper valve, then slowly open the lower valve, so that the measured medium slowly enters the glass tube.

3. During use, the dirt on the inner and outer walls of the glass tube should be cleaned regularly to keep the liquid level clear. Cleaning procedure: first close the upper and lower valves connected to the container, open the drain valve, drain the residual liquid in the glass tube, use the appropriate cleaning agent or use the long rod brush to wipe the dirt on the inner wall of the tube.

4. If the quartz tube breaks or the scale is seriously damaged, the specific steps are: remove the lower body, unscrew the nut and nut at both ends, and knock the quartz glass tube from one end to the other with a wooden stick to take out the graphite ring. The new quartz tube is loaded, and the graphite ring is placed on the quartz tube, and the inside of the watch body is equidistantly inserted, and the nuts and nuts at both ends are tightened to confirm that there is no leakage, and then the operation can be started.

Absorbent Materials

Absorbent Materials,Oil Absorbent Pillow,Liquid Absorbing Materials,Polypropylene Universal Absorbent Material

Sunshine Hygiene and Health Care Technology Jiangyin Co., Ltd , https://www.jyshygiene.com

Posted on