The warehouse can be said to be one of the most important departments of the alloy button factory. Waterproof measures must be in place during the rainy season to ensure that the alloy buttons are safely delivered to customers. Starting in April, the rainy season, which has caused all Dongguan button factories to worry, is still coming. The coming rainy season lasted for a month or two. The accumulation of stagnant water and wet weather made the warehouses close to the enemy. Alloy button from production to conservation has a set of strict procedures, especially in this continuous rainy weather, alloy button to save more during the rainy season to pay attention to some details.
Metal objects are very easily oxidized in a relatively humid environment. Therefore, when storing alloy button embryos, be sure to choose a relatively dry, ventilated place. At the same time, it is necessary to regularly check for leakage of water. A hygrometer should be installed in the warehouse to observe whether the humidity in the warehouse exceeds the standard at any time and handle it according to the situation. The already electroplated button is more resistant to corrosion than the embryo because of the plating on the surface, and the requirement for the environmental humidity is slightly lower. However, it should also be noted that the electroplating layer may be discolored due to excessive humidity, so stick as much as possible to the protective film and package it so that the maximum protection of the button is not affected by moisture. Of course, the most important thing is to beware of torrential rains at any time, leading to much greater precipitation than the drainage pipes. Therefore, when selecting a warehouse, it is very necessary to choose a place with a higher ground, and the goods cannot be placed directly on the ground. There must be shelves.
This article comes from China Button Industry Network
Want to know more about the button news, accessible
Yangzhou Lansun Slipper Co.,Ltd , https://www.lansunslippers.com